多光谱全色分色棱镜的胶合

论述了多光谱全色分色棱镜组的胶合工艺。该棱镜组是由６块非标准角棱镜、１块底板和４块滤色镜共１１个零件所组成。该棱镜组各出射面与入射面之间的角度允差要求≤１０″，各通光面与底板底面之间的垂直度要求⊥≤１０″，棱镜中间还有两处空气隙，空气隙的宽度要求为Ｌ＝０．０５ｍｍ。另外，各棱镜在主光路方向上还有距离（光程）要求，因此该棱镜组的胶合工作成了该项任务加工中一个比较关键的技术。     

Computation of the Reflection Coefficient of a Triangular Semiconductor Prism in a Rectangular Waveguide

In this paper we present a method to solve Maxwell's equations that enables to compute waveguide structure containing a semiconductor triangular prism. The numerical study has showed that the triangular prism in the waveguide has a wider frequency band in comparison with a square rod under equal conditions. The reflection coefficient dependencies on frequency, prism size and its permittivity have been computed. The algorithm and computer programme have been tested and compared with the numerical results and experimental data of the paper [1] with good agreement.     

高能COIL偏振态的实验研究

 通过两块楔镜补充衰减和中性衰减片相结合的能量衰减方法，测得了功率密度为20 W/mm² COIL的偏振态。采用角反射器作为稳定腔折返装置，提高了激光能量分布的均匀性。激光光束分别以45°的入射角入射到两块楔镜上，被楔镜反射后，垂直通过中性衰减片，最后进入偏振态测试仪。实验结果表明：在腔内没有任何偏振选择器件和不加外部电磁场的情况下，采用折叠式稳定腔的横流双模块氧碘化学激光光束呈现部分偏振性质，而且在出光过程中偏振度逐渐降低。     

光强连续可调的圆偏振光衰减器

利用1/4波片及偏光棱镜,设计了光强连续可调的圆偏振光衰减器,通过该器件可获得偏振度高且光强连续可调的圆偏振光.该衰减器解决了632.8 nm多膜氦氖激光器出射光为非完全自然光且偏振面随时间做随机变化导致实验误差的问题,为偏光信息测试系统提供了相对稳定的激光光源.     

Angular interferometer using calcite prism and rotating analyzer

An interferometer using a calcite prism and rotating analyzer is proposed for angular displacement determinations. The calcite prism senses the angular displacements and the rotating analyzer transfers the interference signals from dc-type into ac-type. Compact optical setup and using low-cost devices are thus the advantages of the interferometer. The theory of the interferometer is first demonstrated. A setup constructed to realize the interferometer and the results of using this setup are then presented.     

双棱镜干涉实验中的参量取值研究

本文从理论上推导出双棱镜干涉实验中各参量的取值范围,并通过实验研究找到测量误差小于1%时各参量的取值,这为减小实验误差提供了理论和实验依据.     

Prism‐hamiltonicity of triangulations

The prism over a graph G is the Cartesian product G □ K₂ of G with the complete graph K₂. If the prism over G is hamiltonian, we say that G is prism‐hamiltonian. We prove that triangulations of the plane, projective plane, torus, and Klein bottle are prism‐hamiltonian. We additionally show that every 4‐connected triangulation of a surface with sufficiently large representativity is prism‐hamiltonian, and that every 3‐connected planar bipartite graph is prism‐hamiltonian. © 2007 Wiley Periodicals, Inc. J Graph Theory 57: 181–197, 2008     

Performance evaluation of a wave-front displacement system for vectorial shearing interferometer

We describe a wave-front displacement system using a novel configuration of a pair of wedge prisms. The wave-front propagation, through the displacement system, is analyzed using the exact ray trace. The main advantage, of this configuration, is that the shearing (direction and magnitude) is constant from the displacement system to the image plane. The direction of the shearing depends on the relative orientation of the prisms. The magnitude of the shearing is proportional to the distance between prisms. The proportionality constant depends on the wedge angle and the material of fabrication of the prisms, and it gives the sensitivity to the displacement of the system. The deviation of the shearing due to the difference between the wedge angles is larger than that the produced by the oblique incidence of the wave-front. The experimental results confirm the theoretical data.     

Vibration and dissipative heating of a layered rectangular viscoelastic prism under harmonic shear loading

The vibration and vibrational heating of a rectangular prism with copper and polyethylene layers is studied by solving numerically a coupled problem of thermoelasticity. The cases of kinematic and mechanical harmonic shear loads on a section of the prism surface are examined. Local heating regions are revealed. They are due to the stress fields in the neighborhood of the points at which the type of boundary conditions changes. The temperature–time curves have preresonance, resonant, and postresonance sections. The heating process reaches a steady thermal state under kinematic loading and may become avalanche-like (which is typical of thermal instability) under mechanical loading Translated from Prikladnaya Mekhanika, Vol. 45, No. 2, pp. 70–78, February 2009.     

A highly distorted hexacoordinated silver(I) complex: synthesis,crystal structure,and DFT studies

A new highly distorted hexacoordinated silver(I) complex [AgL₂NO₃] with 2-(bis(methylthio)methylene)-1-phenylbutane-1,3-dione (L) as ligand is synthesized and characterized using elemental analysis, FTIR, NMR, and X-ray single-crystal structure analysis. The ligand (L) and the nitrate group act as bidentate ligands. The geometry around the silver ion has an intermediate configuration between a trigonal prism (TP) and an octahedron (OCT). Continuous shape measure (CShM) analysis indicated a closer configuration to TP than OCT. Experimentally and theoretically, the Ag–S bonds are shorter than any of the Ag–O bonds, indicating a stronger interaction between Ag⁺ (soft metal) and S-atom as a softer site than oxygen. Natural bond orbital (NBO) analyses showed higher interaction energies between the S-atom lone pairs and the Ag–antibonding NBO (8.61–31.39 kcal/mol) than LP(O)→Ag (3.48–11.46 kcal/mol). The acceptor antibonding NBO of the Ag atom has mainly s-orbital character. The Ag atom has a natural charge of +0.7579 e at the experimental structure, suggesting that negative charge was transferred from the ligand (0.0666 e) and nitrate (0.1090 e) to the Ag ion. Using Hirshfeld surface analysis, the important intermolecular interactions between molecular units within the crystal lattice of the ligand and its Ag-complex were analyzed and compared.